Road Street

SONIC HANDGUARD

Bar-end mounting type handguard with an attractive design that can be used in any genre.

SPECIFICATIONS:

- A bar-end mounted handguard that can be changed in style to suit various bikes.
- A higher grade of visuals, a high degree of freedom, and a wealth of functions will enhance your motorcycle life.
- General-purpose bar end type compatible with various handlebars and M16/M8 bar end type for Yamaha/Kawasaki models are available.
- Each of the four models is available with or without a polycarbonate protector.
- Replacement parts for each part are common to both left and right, and are sold in sets of one per side.

The arm position is adjustable freely up and down The guard angle is adjustable up and down in nine steps
By loosening the arm bolt, the angle can be adjusted infinitely up and down around the bar end. With the special spacers, the position can be adjusted by 5 degrees per level from the center position, 4 positions above and 4 positions below, for a total of 9 positions.
The arm can be adjusted in two positions Knuckle guard
By loosening the arm bolt, the angle can be adjusted infinitely up and down around the bar end. With the special spacers, the position can be adjusted by 5 degrees per level from the center position, 4 positions above and 4 positions below, for a total of 9 positions.
Front plate Removable polycarbonate protector
The front plate with laser-printed logo can be detached to create two different designs. Enjoy a wide range of styling with -ZS72-2900 ZETA SONIC Handguard Optional PC Protector 2Pcs and - ZETA Armor hand guard protectors. Removable polycarbonate protector is standard equipment. Enjoy a wide range of styling with ZETA Armor hand guard protectors.


SONIC HAND GUARD UNIVERSAL, M16, M8, M6 Bar end type

Easy to install, stylish handguard that looks great on any bike.

SPECIFICATIONS:

- A stylish handguard that can be styled to fit a variety of bikes.
- Easy installation by simply fixing to the handlebar end.
- No need for complicated work like conventional handguards, yet firmly fixed.
- High-strength aluminum alloy bar ends protect the grips and throttle tubes from accidental falls.
- It is possible to adjust the position freely by adjusting the position infinitely up and down with the handlebar end as the axis, and adjusting the angle up and down in eight steps with the special spacer. It can be adjusted to any position to prevent interference with the vehicle.
- Matte black finish with a laser printed logo on the front plate. You can also attach and remove the optional PC protector of the same series and other ZETA protectors.
- The handguard allows you to freely change the appearance of the image and enjoy the styl ing of your choice.

Image Products Part # Color
SONIC HAND GUARD UNIVERSAL ZS72-2000 Black
SONIC HAND GUARD M16/M8 Bar end type ZS72-2001
SONIC HAND GUARD M6 Bar end type ZS72-2002
Material Knuckle guard : PU Resin
Arm : Forged aluminum
Front plate : High strength aluminum alloy
Bolts and Nuts : Stainless steel
Plug adapter : Steel
Bar end plug : High strength aluminum alloy
[Hanldebar size]
ZS72-2000 Steel handlebar : Innder diameter size 17.5mm - 18.5mm
Aluminum handlebar : Innder diameter 13.5mm - 14.5mm
 ZS72-2001 M16 Bar end type handle (YAMAHA) or M8 bar end type hanlde (KAWASAKI)  
ZS72-2002 M6 Bar end type handle (HONDA/YAMAHA/HUSQVARNA)
 [Mountable protector]
 ZS72-2900 ZETA Sonick Hand guard Optional Polycarbonate protectors left/right set. 

- ZETA Armor hand guard protectors.
[Note]
Can not fit ZETA XC flasher protectors.
Can not fit ZETA Scudo protector.


SONIC HAND GUARD PC Kit UNIVERSAL / M16, M8 Bar end type

Bar-end mounting type handguard comes with Polycarbonate protector.

SPECIFICATIONS:

- Stylish handguard with polycarbonate (PC) protector as standard equipment.
- Polycarbonate (PC), which is resistant to impact, UV rays, and low / high temperatures, has a simple and stylish design that is used in any style of vehicles.
- Not only does it increase wind resistance, but it also mitigates frontal impact.
- Easy installation by simply fixing to the handlebar end.
- No need for complicated work like conventional handguards. Securely fixed with machined high-strength aluminum alloy bar-end plugs.
- It is possible to adjust the position freely by adjusting the position infinitely up and down with - the handlebar end as the axis, and adjusting the angle up and down in eight steps with the special spacer. It can be adjusted to any position to prevent interference with the vehicle.

Image Products Part # Color PC Protecotr
SONIC HANDGUARD PC Kit Universal ZS72-2100 Black Light Smoke
SONIC HANDGUARD PC Kit  M16/M8 Bar end type ZS72-2101
SONIC HANDGUARD PC Kit  M6 Bar end type ZS72-2102
Material Knuckle guard : PU Resin
Arm : Forged aluminum
Front plate : High strength aluminum alloy
Bolts and Nuts : Stainless steel
Plug adapter : Steel
Bar end plug : High strength aluminum alloy
[Hanldebar size]
ZS72-2100 Steel handlebar : Innder diameter size 17.5mm - 18.5mm
Aluminum handlebar : Innder diameter 13.5mm - 14.5mm
ZS72-2101 M16 Bar end type handle (YAMAHA) or M8 bar end type hanlde (KAWASAKI)  
ZS72-2102 M6 Bar end type handle (HONDA/YAMAHA/HUSQVARNA)
 [Mountable protector]
 ZS72-2900 ZETA Sonick Hand guard Optional Polycarbonate protectors left/right set. 

- ZETA Armor hand guard protectors.
[Note]
Can not fit ZETA XC flasher protectors.
Can not fit ZETA Scudo protector.

Replacement
Guard Kit Arm Kit Bar End Kit Universal Bar End Kit M16/M8 Type Bar End Kit M6 Type
ZS72-2910 ZS72-2911 ZS72-2920 ZS72-2922 ZS72-2923
Option PC Protector 2pcs
ZS72-2900